T1 Telephony Parameters (For Mvp2410) - Multitech MULTIVOIP MVP-2410 User Manual

MultiVOIP User Guide
Write down the values for these IP parameters. You will need to enter
these values in the "IP Parameters" screen in the Configuration section
of the MultiVOIP software. You must have this IP information about
every VOIP in the system.

T1 Telephony Parameters (for MVP2410)

The following parameters must be known about the PBX or telco
central office equipment to which the T1 MultiVOIP will connect:
T1 Phone Parameters
Ask phone company or
PBX maintainer.
• Which frame format is used?
• Which CAS or PRI protocol is used? ______________
• Clocking: Does the PBX or telco switch use
• Which line coding is used?
Write down the values for these T1 parameters. You will need to enter
these values in the "T1/E1 Parameters" screen in the Configuration
section of the MultiVOIP software.
T1 Telephony Parameters:
Record for this VOIP Site
or clocking? _________________
internal external
Note that the setting used in the voip unit will be the
opposite of the setting used by the telco/PBX.
Technical Configuration (T1/E1)
Info needed to operate:
MVP2410
___ or
ESF
___ or
AMI B8ZS
125
___
D4
___