Multitech MULTIVOIP MVP-2410 User Manual page 325

MultiVOIP User Guide
Add/Edit Outbound Phone Book: Field Definitions
Field Name
Destination
Pattern
Total Digits
Remove Prefix
Add Prefix
IP Address
Description
Protocol Type
(cont'd)
Values Description
prefixes, Defines the beginning of
area codes, dialing sequences for calls
exchanges, that will be connected to
line another VOIP in the system.
numbers, Numbers beginning with
extensions these sequences are diverted
from the PTSN and carried
on Internet or other IP
network.
as needed This field currently disabled.
number of digits the phone
user must dial to reach
specified destination.
dialed digits portion of dialed number to
be removed before
completing call to destination
dialed digits digits to be added before
completing call to destination
n.n.n.n the IP address to which the
for call will be directed if it
n = 0-255 begins with the destination
pattern given
alpha- Describes the facility or
numeric geographical location at
which the call will be
completed.
Indicates protocol to be used in
SIP or H.323
outbound transmission. Single
or SPP
Port Protocol (SPP) is a non-
standard protocol designed by
Multi-Tech.
325
T1 PhoneBook Configuration