Multitech MULTIVOIP MVP-2410 User Manual page 143

MultiVOIP User Guide
The Voice/FAX Parameters fields are described in the tables below.
Field Name
Default
Select
Channel
Copy
Channel
Voice Gain
Input Gain
Output Gain
DTMF Parameters
DTMF Gain
DTMF Gain,
High Tones
DTMF Gain,
Low Tones
Technical Configuration (T1/E1)
Voice/Fax Parameter Definitions
Values Description
-- When this button is clicked, all
Voice/FAX parameters are set to their
default values.
Channel to be configured is selected
1-24 (T1)
here.
1-30 (E1)
-- Copies the Voice/FAX attributes of
one channel to another channel.
Attributes can be copied to multiple
channels or all channels at once.
-- Signal amplification (or attenuation)
in dB.
+31dB Modifies audio level entering voice
to channel before it is sent over the
–31dB network to the remote VOIP. The
default & recommended value is 0 dB.
+31dB Modifies audio level being output to
to the device attached to the voice
–31dB channel. The default and
recommended value is 0 dB.
-- The DTMF Gain (Dual Tone Multi-
Frequency) controls the volume level
of the digital tones sent out for Touch-
Tone dialing.
+3dB to Default value: -4 dB. Not to be
-31dB & changed except under supervision of
"mute" MultiTech's Technical Support.
+3dB to
Default value: -7 dB. Not to be
-31dB & changed except under supervision of
"mute" MultiTech's Technical Support.
143