Modem Relay - Multitech MULTIVOIP MVP-2410 User Manual

Technical Configuration (Analog/BRI)
Field Name
Dynamic Jitter
Maximum
Jitter Value
Optimizat-
ion Factor

Modem Relay

To place modem traffic onto the voip network (an application called "modem relay"),
use Coder G.711 mu-law at 64kbps.
Voice/Fax Parameter Definitions (cont'd)
Values Description
60 to 400 The maximum dynamic jitter buffer
ms of 400 milliseconds is the maximum
delay tolerable over a high jitter
network.
Default = 300 msec
0 to 12 The Optimization Factor
determines how quickly the length
of the Dynamic Jitter Buffer is
changed based on actual jitter
encountered on the network.
Selecting the minimum value of 0
means low voice delay is desired,
but increases the possibility of jitter-
induced voice quality problems.
Selecting the maximum value of 12
means highest voice quality under
jitter conditions is desired at the
cost of increased voice delay.
Default = 7.
238
MultiVOIP User Guide