Introduction; Loading Multivoip Software Onto The Pc - Multitech MULTIVOIP MVP-2410 User Manual

MultiVOIP User Guide

Introduction

Configuring software for your MultiVOIP entails three tasks:
(1) loading the software onto the PC (this is "Software Installation and
is discussed in this chapter),
(2) setting values for telephony and IP parameters that will fit your
system (this is "Technical Configuration" and it is discussed in Chapter
5 for T1/E1 MultiVOIP units and in Chapter 6 for analog MultiVOIP
units), and
(3) establishing "phonebooks" that contain the various dialing patterns
for VOIP calls made to different locations (this is "Phonebook
Configuration" and it is discussed in Chapters 7, 8, and 9 for T1, E1,
and analog MultiVOIP units respectively).

Loading MultiVOIP Software onto the PC

The software loading procedure does not present every screen or option
in the loading process. It is assumed that someone with a thorough
knowledge of Windows and the software loading process is performing
the installation.
The MultiVOIP software and User Guide are contained on the
MultiVOIP product CD. Because the CD is auto-detectable, it will start
up automatically when you insert it into your CD-ROM drive. When
you have finished loading your MultiVOIP software, you can view and
print the User Guide by clicking on the View Manuals icon.
1. Be sure that your MultiVOIP has been properly cabled and that the
power is turned on.
111
Software Installation