Updating Planning Information - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
2 Control Unit Configuration
Numbering the System
Proceed to the next section,

Updating Planning Information

On the floor plan, add the extension number beneath the symbol for each
telephone and adjunct. If you are using a system programming console, go to
Form 1, System Planning, in the System Operating Conditions section and add
the new extension number of the console in the space next to Ext. No.
NOTE: NOTE: NOTE:
The remaining columns on Form 2a (Eqpt., Label, Old Ext. No., and Wire
No.) are completed by the technician during installation.
To complete the forms for lines/trunks, proceed to
''Updating Planning Information''.
2
Chapter 3, ''Lines/Trunks''.
Issue 1
June 1997
Page 2-31