Camp-On Return Time; Call Park Return Time - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
4 Features
System Features
Under the Transfer Audible heading, do one of the following:
3.
4. Under the Type of Transfer heading, do one of the following:

Camp-On Return Time

This section contains instructions for designating the number of seconds a caller
waits when transferred to a busy extension by way of the Camp-On feature. If the
telephone is still busy at the end of the programmed interval, the call returns to the
person who transferred the call.
Planning Form Instructions
Under the Camp-On Return Time heading on Form 8a, do one of the following:
To keep the factory-set interval, check the 90 seconds box.
To change the factory-set interval, check the second box and write the
number of seconds (30 through 300) in the space provided.

Call Park Return Time

This section contains instructions for designating the number of seconds a caller
waits when a person uses the Call Park feature to put a call on hold. If the call is
not picked up at the end of the programmed interval, the call returns to the person
who parked the call.
Planning Form Instructions
Under the Call Park Return Time heading on Form 8a, do one of the following:
To keep the factory-set interval, check the 180 seconds box.
To change the factory-set interval, check the second box and write the
number of seconds (30 through 300) in the space provided.
NOTE:
If programmed for Music On Hold and a music source is provided,
outside callers who are transferred to a calling group, are waiting in
the queue, or outside callers who are parked or camped-on, will hear
music while they are waiting.
If the system should play music while callers are on hold for transfer,
check the Music On Hold box.
If the system will not provide music, check the Ringback box.
For the system to select a Ring button for transferred calls, check
the Ring button box (factory setting).
For the system to select a Voice button for transferred calls, check
the Voice button box.
4
4
Issue 1
June 1997
Page 4-37