D T1/Pri Planner - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
D T1/PRI Planner
Planning Form Instructions
1. On page 1, fill in the customer name, telephone number, and address.
NOTE:
Reference Number is filled in by NTM.
2. Fill in the Order Number.
3. Identify the personnel handling the account:
a. Account Executive's name and telephone number.
b. System Consultant's name and telephone number.
4. Identify the DS1 facility vendor by writing the vendor's name under the
T1/PRI Vendor heading, along with the contact person's name and tele-
phone number.
5. Under the Installation heading:
a. Write the "Due Date" on which the installation is scheduled to be com-
b. Write the date the equipment is scheduled for delivery to the customer
6. Under the Installation Contacts heading, list the names and telephone num-
bers of the personnel responsible for the equipment order and its installa-
tion:
a. (Order) Implementor
b. NTM Manager
c. National Technical Service Center (NTSC) Engineer
d. Data Services Organization (DSO) Manager
7. Under the question about whether the order has been placed:
8. On page 2, complete one box for each 100D module by transferring the op-
tions information for each module from the corresponding box on Form 3b
(page 1):
a. Service Ordered or Planned (Type of Service)
b. Frame Format
c. Switch Type
d. Line Coding (Suppression)
e. Line Signaling Mode
f. Synchronization Timing (Clock Synchronization: Source)
plete.
in the Materials-on-Job Date space.
If the order has been placed, check the Yes box and fill in the date.
If the order has not been placed, check the No box.
Issue 1
June 1997
Page D-2