Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual page 76

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
2 Control Unit Configuration
Numbering the System
Power-Integrated Solution II (IS II) or III (IS III), and Integrated Voice Power
Automated Attendant-IS II or IS III. Do not use the 008 OPT module for these
applications.
The system can accept up to eight application ports (extension jacks for
applications) using the 012 module [517G13(28)]. All 16 ports on the 016 module
(517A34) may be used for applications.
Table 2-6 shows, by application, the number of ports used, the number of TTRs
required, and the number of additional single-line telephones that can be added to
the modules. Use this table as a guideline.
Table 2-6.
Application
MERLIN MAIL
Lucent
Technologies
Attendant
AUDIX Voice
Power
NOTES:
1. Older versions of the 012 module, (apparatus codes 517C13–517F13) if
one or more applications are used, only four tip/ring (T/R) devices may be
assigned to the module where the application is assigned, regardless of
how many jacks are open.
2. The applications discussed here do not work properly with 012 modules
manufactured for older MERLIN II systems. These applications must be
NOTE:
If the system has AUDIX Voice Power, the Integrated Administration
feature provides a single interface through Integrated Solution III (IS
III) for programming entries common to the system and to the AUDIX
Voice Power system. These common entries are noted on the
planning forms, and instructions for planning the system in
conjunction with planning for the AUDIX Voice Power system are
included in the procedures throughout this book. For more
information about this and other applications, see the Feature
Reference .
Application Ports
Ports TTRs
2 1
4 2
1 1
2 1
3 2
4 2
2 1
4 2
6 3
8 4
Telephones
5 + 1 for the modem
3 + 1 for the modem
6 + 1 for programming
5 + 1 for programming
4 + 1 for programming
3 + 1 for programming
6
4
2
0
Issue 1
June 1997
Page 2-26