Cover Ring Delay - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
4 Features
Telephone and Extension Features
Planning Form Instructions
1. On page 1 of Form 4a and/or Form 4c, write the extension number of the
Master Extension and the extensions to which this template will be copied.
2. Complete the Button Diagram on page 2 of Form 4a and/or Form 4c,
assigning features to the buttons.
3. On the individual telephone forms (Forms 4b, 4d, 4e, 5a, 5b and 5c) do the
following:
a.
b.

Cover Ring Delay

Beginning with Release 4.1, the following ring delay options can be programmed
for extensions:
The Group Coverage Ring Delay is programmed on individual sender
extensions and replaces the Coverage Delay Interval programmed on a
system-wide basis in previous releases.
When used in conjunction with Secondary Cover buttons, consider the
following when setting the value:
The Primary Cover Ring Delay and Secondary Cover Ring Delay are
programmed on individual sender extensions and replace the Delay Ring
Interval programmed on a system-wide basis.
Alarm
Extension Status Off
Extension Status 1
Extension Status 2
Missed Reminder
Night Service
Operator Park
Send/Remove Message
By the extension information at the top of each page, check Copied
from Master Extension No. and write the extension number of the
Master Extension.
Under every form's Button Diagram heading, check the See Master
Extension box.
— Secondary cover buttons are programmed for a sender, set the
value such that when the Group Coverage Ring Delay is added to
the Primary Cover Ring Delay, the result is greater than the
Secondary Ring Delay plus two rings (the fixed Secondary Cover
Delay Interval).
4
Issue 1
June 1997
Page 4-12