Ni-1 Bri Review - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
G

NI-1 BRI Review

NI-1 BRI Review
0
This appendix contains instructions for completing the NI-1 BRI Planner Form. If
you have questions while completing the form prior to the sale, contact the AT&T
National Technical Marketing (NTM) engineers. Once the contract has been
signed and the forms are completed, make a photocopy of the forms for your
records and forward the forms to the technician who will do the installation. The
technician will then fax a copy to the National Service Assistance Center (NSAC)
if any questions or problems occur at the customer site.
The NI-1 BRI Planner form should be used in conjunction with System Form 3i, In-
coming Trunks: BRI Options (800 NI-BRI Module).
Form Needed
NI-1 BRI Planner
Planning Form Instructions
NOTE:
Prior to completing any of the steps below, you should first verify that the custom-
er's local service provider offers National ISDN-1 BRI service with ISDN Ordering
Code (IOC) standardized capability package "S" and a separate Multi-Line Hunt
(MLH) service, depending on the customer's requirements. If the Central Office
uses an AT&T 5ESS or Siemens SSC EWSD switch, MLH is available through the
Series Completion feature. The Multi-Line Hunt Group (MLHG) feature on these
CO switches is not recommended for use with MERLIN LEGEND. The Northern
Telecom DMS-100 provides MLH service through the MLHG feature. A customer
may want to order several BRI lines, some assigned as IOC package "S" and the
others as MLH.
To properly order and administer NI-1 BRI service, it may be necessary to contact
the local service provider to determine what services are available and the type of
switching equipment used. See
information that the local service provider may require in order to supply the nec-
essary connections.
Appendix H, ''NI-1 BRI Provisioning''
Issue 1
June 1997
Page G-1
G
for detailed