Inside Dial Tone; Reminder Service Cancel - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 5.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
4
Features
System Features
Under the Calls Reported heading, do one of the following:
3.
4.
Under Talk Time heading, do one of the following:

Inside Dial Tone

This section contains instructions for specifying whether the system uses an
inside dial tone that is different from or the same as outside line/trunk dial tone.
The factory setting is for a different inside dial tone. How you set the system for
dial tone is a matter of preference.
NOTE:
NOTE:
NOTE:
Regardless of how you set this option, VMSs receive outside dial tones.
Some modems may require outside dial tone to dial out.
Planning Form Instructions
Under the Inside Dial Tone heading on Form 8a, do one of the following:
To keep the factory-set system inside dial tone, check the Inside box.
To change the dial tone to match the outside dial tone, check the Outside
box.

Reminder Service Cancel

This section contains instructions for assigning a preset time when the system
cancels all reminders.
Although all users can set and cancel reminder calls for their own telephones, and
DLC system operators can set and cancel reminder calls for any telephone in the
system, Reminder Service Cancel automatically cancels all reminder calls at the
preset time, for example, at the end of the business day when all users have gone
home and are not available to receive reminders.
Planning Form Instructions
Under the Reminder Service Cancel heading on Form 8a, do one of the following:
To set no reminder service cancel time, check the No box.
To set a time to cancel all reminders in the system, check the second box
and write the time of day in the space provided.
To keep the factory setting, check the Incoming and outgoing box.
To change the factory setting, check the Outgoing only box.
To keep factory setting, check the Disable box.
To change the factory setting, check the Enable box.
4
4
Issue 1
June 1997
Page 4-40

Advertisement

Table of Contents
loading

Table of Contents