Environmental Specifications - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
1 Before You Begin
Requirements for Supporting CTI Applications
NOTE: NOTE: NOTE:
If you have Version 29, replace the board with an appropriate version, or for
a replacement card, call the TSO at: 800 628-2888.
If the MERLIN LEGEND Communications System has only one MLX port
board, you will also need System Programming and Maintenance (SPM)
software, Version 5.15 to administer your CTI link.
One port on an MLX port board is used for the link. Select from ports
2,3,4,6,7, or 8 (the CTI Link port cannot be the potential operator port or
the console programming port).
For a NetWare 3.12 installation, ensure that NWSNUT.NLM, Version 4.11
or later, and TUI.NLM, Version 1.04 or later, is obtained from Novell and
installed in the SYS:\SYSTEM directory.
NOTE: NOTE: NOTE:
To obtain these NLMs from Novell, access either the Novell web site
(http:\\www.novell.com) or the Novell FTP site (ftp.novell.com). First
download IPXRT4.EXE and follow the directions in the associated readme
file. Then, download NWSNUT.NLM and TUI.NLM.
For more information on setting up the system see the MERLIN LEGEND
Communications System Network Manager's Guide.

Environmental Specifications

If the Telephony Server platform and the MERLIN LEGEND Communications
System are to share an equipment room, the room's environment (temperature,
humidity, contaminants, EMI, AC power and grounding) must meet the more
demanding set of environmental specifications for the two units. Refer to the
specifications for each hardware platform for details.
1
Issue 1
June 1997
Page 1-8