Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual page 250

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
5 Data Communications
Digital Data/Video Stations
4. In the Digital Facilities space, enter the method used to access incoming
and outgoing facilities.
a.
b.
5. If an MLX telephone is connected to a desktop video system in a Passive
Bus arrangement, indicate this in the Passive Bus space. Enter the
extension number of the passive bus MLX set.
In the Digital Facilities In space, enter one of the following for
incoming data/video calls:
1. If DFTs are used to receive data/video calls, enter the
line/trunk number for each DFT. For example, 801/802.
2. If Dial Plan Routing is used to route incoming data/video calls
(PRI and T1 Switched 56 facilities only), enter Dial Plan
Routing.
3. If Tie Line Routing is used to route incoming data/video calls
(PRI and T1 Switched 56 facilities only), enter Tie Line
Routing.
In the Digital Facilities Out space, enter one of the following for
outgoing data/video calls:
1. If DFTs are used to place outgoing data/video calls, enter the
line/trunk number for each DFT. For example, 801/802.
2. If Pool Access is used to place outgoing data/video calls,
enter the pool access number. For example, 890.
3. If Automatic Route Selection (ARS) is used to place outgoing
data/video calls, enter the ARS access code. The default
ARS access code is 9.
Issue 1
June 1997
Page 5-44