Queued Call Console (Hybrid/Pbx Only); Pool Dial-Out Code Restriction (Hybrid/Pbx Only) - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
4 Features
Telephone and Extension Features
Form 5d, Queued Call Console (QCC)
Form 6b, Optional Extension Features
Form 6g, Call Restriction Assignments and Lists
Form 6h, Authorization Codes
Form 6i, Pool Dial-Out Code Restrictions
Floor plan

Queued Call Console (Hybrid/PBX Only)

Use these instructions if the system includes one or more QCCs. Otherwise, skip
to the next section,
Planning Form Instructions
1. Transfer the user information from Form 2a, System Numbering: Extension
Jacks to each copy of Form 5d by filling in the Logical ID, Extension No.,
and Person or Location spaces. Use the Button Diagram on Form 5d, as a
guide for labeling the operator console buttons. You cannot change the
button assignments shown. However, if the QCC Voice Announce feature
is enabled, the Call 5 button becomes a VA (Voice Announce) button.
Refer to the
2. Check the box under the Adjuncts heading that applies to the equipment at
the extension (see the floor plan).
3. Under Message Center Operator, check No if the QCC will not be a
message center or Yes if it will be a message center.
Proceed to the next section,
Pool Dial-Out Code Restriction
(Hybrid/PBX Only)
This section contains instructions to tailor the use of dial-out access codes by
restricting extensions from making calls on specific trunk pools (for example,
those consisting of special-purpose lines/trunks such as WATS or FX) or to
reserve trunk pools for data communications only.
Planning Form Instructions
Use Form 6i to identify those extensions that are restricted from using some
dial-out access codes. The factory setting is for all extensions to be restricted from
using all dial-out access codes. This form only identifies extensions that are to
remain restricted. Extensions that are not listed on this form must have their
restrictions removed through system administration.
''Pool Dial-Out Code Restriction (Hybrid/PBX
''Operator Features''
''Pool Dial-Out Code Restriction (Hybrid/PBX
4
section later in this chapter.
4
Issue 1
June 1997
Page 4-3
Only)''.
Only)''.