Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual page 175

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
4 Features
Group-Assigned Features
5. To designate a telephone to receive message-waiting indications for the
group, do one of the following under the Message-Waiting Receiver
heading on Form 7d (page 2):
6. Under the First Calls-in-Queue Alarm Threshold heading, do one of the
following:
7. Under the Second Calls-in-Queue Alarm Threshold heading, do one of the
following:
Under the Third Calls-in-Queue Alarm Threshold heading, do one of the
8.
following:
9. Under the External Alert for Calls-in-Queue Alarm heading, do one of the
following:
10. Under the Overflow Coverage heading, do one of the following:
To assign no receiver, check the No box.
To assign a receiver, check the second box and write the extension
number of the message-waiting receiver (see Form 2a).
To keep the factory setting, check the 1 Call box.
To change the factory-set number of calls allowed in the queue
before members are notified with a flashing LED, check the second
box and write the number of calls (up to 99) in the space provided.
To keep the factory setting, check the 1 Call box.
To change the factory-set number of calls allowed in the queue
before members are notified with a winking LED, check the second
box and write the number of calls (up to 99) in the space provided.
To keep the factory setting, check the 1 Call box.
To change the factory-set number of calls allowed in the queue
before members are notified with a steady LED, check the second
box and write the number of calls (up to 99) in the space provided.
For no external alert for Calls-in-Queue Alarm, check the No box.
To designate an external alert when the Third Calls-in-Queue Alarm
Threshold is exceeded, check the second box and write the
extension number for the alert in the space provided (see Form 2b).
For no overflow coverage, check the No box.
To designate overflow coverage by another calling group, check the
second box and write the calling group number of the overflow
calling group in the space provided.
To designate that overflow coverage will be provided by QCC
operators, check the third box and write the QCC LDN (queue)
extension number in the space provided.
Issue 1
June 1997
Page 4-33