Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual page 297

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
D T1/PRI Planner
4. If the type of service is PRI, complete the PRI Identification Service section
by doing one of the following:
NOTE:
The availability of the caller identification information may be limited by lo-
cal-serving (caller's) jurisdiction, availability, or central office equipment.
5. In the Channel Service Unit section:
a. Check the box that describes the channel service unit used. If you are
b. Forward all copies of this page along with a copy of the Planner to Tier
If you are not planning to use the number identification service, check
the No box and proceed to Step 5.
If you are planning to use the identification services, check the Yes box
and check the service planned:
— For incoming calls, check one of the following boxes: ANI, SID, or
Both. If both automatic and extension identification service are
planned, indicate the order in which the information should be dis-
played (ANI then SID or SID then ANI).
— For outgoing calls, check either ANI, SID/ANI Privacy, SID—Exten-
sion Based, or SID—Line Based to indicate the service planned.
not using the model listed, check the second box and write in the manu-
facturer information that describes the unit.
III, GBS NTSC.
Issue 1
June 1997
Page D-7