Transfer Options - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

Communications system
Hide thumbs Also See for MERLIN LEGEND Release 5.0:
Table of Contents

Advertisement

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
4
Features
System Features

Transfer Options

This section contains instructions for setting the following Transfer feature options
to allow users to transfer outside or inside calls to another telephone:
Transfer Return Interval
One-Touch Transfer
Transfer Audible
Type of Transfer
NOTES:
1. Transfer features, and any other feature that requires more than one SA
button, can be disabled on Single-line telephones by removing all but one
SA button through centralized programming. Refer to Form 4f, Tip/Ring
Equipment.
2. If customers with CTI applications will frequently use the Conference
feature, set the system Transfer Type to Ring and not Voice. This will
minimize the possibility of broadcasting a conference over an unattended
speakerphone.
Planning Form Instructions
NOTE:
NOTE:
NOTE:
If the system includes AUDIX Voice Power/Fax Attendant System,
Integrated Administration automatically sets the Return Time Interval to 6. If
the system does not include integrated administration, but does have a
voice mail system, the interval should be set to a value greater than 4 so
that the voice mail system will get the call first.
1.
Under the Return Time Interval heading in the Transfer Options section of
Form 8a, do one of the following:
2.
Under the One-Touch Call Handling heading, do one of the following:
To keep the factory setting, check the 4 rings box.
To indicate no return for transferred calls, check the 0 rings box.
To change the factory-set number of rings, check the third box and
write the number of rings (1 through 9) in the space provided.
To keep the factory setting, check the One-Touch Transfer box and
do one of the following:
— Check the Automatic Completion box to keep the factory-set
automatic completion of transfers.
— Check the Manual Completion box to change the factory
setting to manual completion.
To change from One-Touch Transfer to One-Touch Hold, check the
One-Touch Hold box.
4
Issue 1
June 1997
Page 4-36

Advertisement

Table of Contents
loading

Table of Contents