Eds1 Connectivity Ordering - Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
E DS1 Connectivity Ordering
DS1 Connectivity Ordering
0
After the contract is signed, the sales representative or authorized dealer contacts
the DS1 connectivity vendor to discuss the T1/PRI service order. The vendor
needs information about the communications system as well as customer identifi-
cation. Table E 1 describes the kind of information the vendor requires. This table
should be reviewed with the customer's network representative or dealer so the in-
formation will be available when needed.
Table E–1. Guide to DS1 Connectivity Ordering
Communications System
Manufacturer
Model
Type (Mode)
Jack Type
Facility Interface Code
Digital PBX
o
Has the EIA standard CISA transmission path
o
Is senderized
o
Is the equipment that must be timed
o
Has an internal stratum clock level of 4
o
Provides automatic call distribution through Group Calling feature
o
Provides loopback (keep signal alive) through CSU.
AT&T
MERLIN LEGEND
digital PBX
RJ48C or RJ48X
Digital D4 Framing
Digital ESF Framing
Digital ESF and B8ZS
Issue 1
June 1997
Page E-1
E