Lucent Technologies MERLIN LEGEND Release 5.0 System Planning Manual page 375

MERLIN LEGEND Communications System Release 5.0
System Planning 555-650-112
Glossary
SDN
SID
signaling
single-line
telephone
slot
SMDR
SMDR printer
Software Defined
Network
special character
SPM
station
station jack
Station Message
Detail Recording
Supplemental
Alert Adapter
switchhook flash
System Access
buttons
system date and
time
system
programming
System
Programming and
Maintenance
(Software Defined Network) AT&T private networking
service created by specialized software within the public
network.
[station (extension) identification]
Sending of control and status information between devices
to set up, maintain, or cease a connection such as a
telephone call.
Industry-standard touch-tone or rotary-dial telephone that
handles one call at a time and is connected to the system
via an extension jack on a 012, 016, or 008 OPT module.
Position in a carrier for a module; numbered from 0.
(Station Message Detail Recording) Feature that captures
detailed usage information on incoming and outgoing voice
and data calls.
Printer used to produce SMDR reports. Connected to the
system via an RS-232 jack on the processor module .
See SDN .
Pause, Stop, or End-of-Dialing signal in a programmed
dialing sequence such as an Auto Dial or Personal Speed
Dial number.
(System Programming and Maintenance) DOS - or UNIX
System-based application for programming and
maintaining the system.
See extension .
See extension jack .
See SMDR .
See SAA .
Momentary (320 ms to 1 second) on-hook signal used as a
control; may be directed to the control unit or to a host
switch outside the system. Also called "Recall" or "timed
flash."
See SA buttons .
Date and time that appear on MLX display telephones and
SMDR reports.
Programming of system functions and features that affect
most users, performed from an MLX-20L telephone or a
computer using SPM . See also extension programming
and centralized telephone programming.
See SPM .
Issue 1
June 1997
Page GL--17