Product Setup; Quick Installation - D-Link DUB-H7 Quick Installation Manual

PRODUCT
SETUP

QUICK INSTALLATION

DUB-H7
1. Plug the power adapter into the receptor
located on the back of the DUB-H7. Plug
the other end into a wall outlet.
2. Plug the square (Type B) end of the
included USB cable into the back of the
DUB-H7.
3. Plug the Type A connector end of the
included USB cable into an available USB
port on your computer.
4. Your computer will automatically detect and
install the drivers for the DUB-H7. You may
now connect USB 2.0 or USB 1.1 devices
to any available USB port on the front of
the DUB-H7.
3