Chapter 1 Web-Based Switch Configuration; Introduction; Login To The Web Manager; Web-Based User Interface - D-Link DGS-3000 Series Reference Manual

Chapter 1

Introduction

Login to the Web Manager

Web-based User Interface

Web Pages
Introduction
Most software functions of the DGS-3000 Series switches can be managed, configured and monitored via the
embedded web-based (HTML) interface. Manage the Switch from remote stations anywhere on the network through a
standard browser. The browser acts as a universal access tool and can communicate directly with the Switch using
the HTTP protocol.
Login to the Web Manager
To begin managing the Switch, simply run the browser installed on your computer and point it to the IP address you
have defined for the device. The URL in the address bar should read something like: http://123.123.123.123, where
the numbers 123 represent the IP address of the Switch.
NOTE: The factory default IP address is 10.90.90.90.
This opens the management module's user authentication window, as seen below.
Leave both the User Name field and the Password field blank and click OK. This will open the Web-based user
interface. The Switch management features available in the web-based manager are explained below.
Web-based User Interface
The user interface provides access to various Switch configuration and management windows, allows you to view
performance statistics, and permits you to graphically monitor the system status.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Web-based Switch Configuration
Figure 1-1 Web UI Login Window
5