Setting The Password - 3Com OfficeConnect User Manual

Figure 12 Welcome Screen
If the Wizard does not launch automatically (this may occur if the
Router has been powered up or configured previously) you can
launch the Wizard manually.
5 To launch the Wizard manually click on the Setup Wizard tab in
the welcome screen followed by the WIZARD... button.
Figure 13 Wizard Screen
Click Next to continue.
You will now be guided through the setup of your Router.

Setting the Password

When the Change Administration Password screen
appears, type the Old Password, then a new password in both
the New Password and Confirm Password fields.
The default password for the Router is 'admin'. It is case sensitive
and must be entered as the Old Password the first time you
configure the Router. 3Com recommends that you change the
password from its default value.
24
(Figure 14)