Table of Contents
Advertisement
Basic Setting
The Basic Setting group provides you to configure switch information, IP address, User name/Password of the system. It also
allows you to do firmware upgrade, backup and restore configuration, reload factory default, and reboot the system. The
following commands are included in this group:
•
Switch Setting
on Page 31
•
Admin Password
on Page 32
•
IP Configuration
on Page 32
•
Time Setting
on Page 33
•
DHCP Server Configuration
•
Backup and Restore
on Page 38
•
Firmware Upgrade
on Page 39
•
Factory Defaults
on Page 40
•
System Reboot
on Page 41
•
CLI Commands for Basic Setting
Switch Setting
You can assign System name, Location, Contact and view system information.
Switch Setting
System Name
System Location
System Contact
System OID
System Description
Firmware Version
Device MAC
Basic Setting
on Page 36
on Page 42
You can assign a name to the device. You can input up to 64 characters. After you configure the
name, The CLI system selects the first 12 characters as the name in CLI system.
You can specify the switch's physical location with up to 64 characters.
You can specify contact people with up to 64 characters by typing the name, mail address or other
information of the administrator.
The SNMP object ID of the switch. You can follow the path to find its private MIB in MIB
browser.
Note: When you attempt to view private MIB, you should first compile private MIB files into
your MIB browser.
ES7506 Industrial Managed Switch is the system description of this product.
Displays the firmware version installed in this device.
Displays a unique hardware address (MAC address) assigned in the factory.
Description
RocketLinx ES7506 User Guide: 2000529 Rev. E - 31
Basic Setting
Advertisement
Table of Contents
