Table of Contents
Advertisement
Command Line for PoE Control
This table provides detailed information about the CLI commands for PoE control.
Syntax
show poe status IFNAME
IFNAME : interface name
Parameters
Enable mode
Command Mode
Description
Display the PoE status of interface.
Switch> enable
Switch# show poe status fa1
Interface fastethernet1
Examples
Command Line for PoE Control
PoE Status
Powering mode : 802.3af
Control mode : User (Enable)
Status : Searching
Port Type : POE Port 1
Classification : N/A
PoE Usage
Power : 0.00 Watts, Voltage : 0.00 V, Current : 0.00 mA
PoE Limitation
Power Mode : Standard
Power Limit : Follow 802.3af
PoE Counter
MPS Absent Counter : 0
Invalid Signature Counter : 0
Denied Counter : 0
Overload Counter : 0
Short Counter : 0
Command Line for PoE Control
RocketLinx ES7506 User Guide: 2000529 Rev. E - 55
Advertisement
Table of Contents
