Command Lines For Rstp - Comtrol ES7506 User Manual

Command Lines for RSTP

Command Lines for RSTP
This table provides detailed information about the CLI command lines for RSTP.
Feature
RSTP
Enable Switch(config)# spanning-tree enable
Disable
Switch(config)# spanning-tree disable
Switch(config)# spanning-tree mode rapid-stp
RSTP mode
SpanningTree Mode change to be RST(802.1w).
Switch(config)# spanning-tree mode stp
STP mode
SpanningTree Mode change to be STP(802.1d).
Switch(config)# spanning-tree priority
Priority
<0-61440>
Switch(config)# spanning-tree priority 4096
Switch(config)# spanning-tree max-age
Max Age
<6-40>
Switch(config)# spanning-tree max-age 10
Switch(config)# spanning-tree hello-time
Hello Time
<1-10>
Switch(config)# spanning-tree hello-time 2
Switch(config)# spanning-tree forward-time
Forward Delay
<4-30>
Switch(config)# spanning-tree forward-time 15
Switch(config)# spanning-tree algorithm-timer
algorithm-timer
forward delay, max-age, hello time.
Switch(config)# spanning-tree algorithm-timer 15 20 2
Switch(config-if)# spanning-tree cost
<1-200000000>
Port Path Cost
value range
from 1-200,000,000
Switch(config-if)# spanning-tree cost 200000
Switch(config-if)# spanning-tree port-priority
Port Priority
<0-240>
Switch(config-if)# spanning-tree port-priority 128
bpdufilter
Switch(config-if)# spanning-tree bpdufilter enable
bpduguard
Switch(config-if)# spanning-tree bpduguard enable
Link Type - Auto
Switch(config-if)# spanning-tree link-type auto
Link Type - P2P
Switch(config-if)# spanning-tree link-type point-to-point
64 - RocketLinx ES7506 User Guide: 2000529 Rev. E
valid range is 0 to 61440 in multiple of 4096
Valid range is 6~40 seconds
Valid range is 1~10 seconds
Valid range is 4~30 seconds
16-bit based value range from 1-65535, 32-bit based
Number from 0 to 240, in multiple of 16
Command Line
Command Lines for RSTP