Table of Contents
Advertisement
RSTP Information
This page allows you to see the information of the root switch and port status.
RSTP
Information
Root
You can see root Bridge ID, Root Priority, Root Port, Root Path Cost and the Max Age, Hello Time and For-
Information
ward Delay of BPDU sent from the root switch.
Port Information
Descriptive information about the RSTP switch port role. Role Root, Designated, Alternate, Backup, Dis-
Port Role
abled, Unknown.
Descriptive information about the RSTP switch port state. State: Blocking, Listening, Learning,
Port State
Forwarding, Disabled, Unknown.
The cost of the path to the other bridge from this transmitting bridge at the specified port. Path cost range is
Path Cost
1 through 200000000.
Port Priority
Decide which port should be blocked by priority in your LAN. Range is 0 through 240 in increments of 16.
Some of the rapid state transactions that are possible within RSTP are dependent upon whether the Port in
Oper P2P
question can be concerned to exactly one other Bridge (that is, it is served by a point-to-point LAN seg-
ment), or can be connected to two or more Bridges (that is, it is served by a shared medium LAN segment).
Present in implementations that support the identification of edge ports. All ports directly connected to end
stations cannot create bridging loops in the network and can thus directly transition to forwarding, skipping
Oper Edge
the listening and learning stages. When the non-bridge device connects an admin edge port, this port is in
blocking state and turn to forwarding state in 4 seconds.
Reload
Click to reload.
RSTP Information
Description
RocketLinx ES7506 User Guide: 2000529 Rev. E - 61
RSTP Information
Advertisement
Table of Contents
