Cli Commands For Warnings - Comtrol ES7506 User Manual

CLI Commands for Warnings

This table provides detailed information about the command lines of the warning configuration.
Feature
Fault Relay Output
Dry Output
Ping Failure
Port Link Failure
Power Failure
Super Ring Failure
Disable Relay
Display
CLI Commands for Warnings
Switch(config)# relay 1 dry
<0-4294967295> turn on period in second
Switch(config)# relay 1 dry 5
<0-4294967295> turn off period in second
Switch(config)# relay 1 dry 5 5
Switch(config)# relay 1 ping 192.168.250.33
<cr>
reset reset a device
Switch(config)# relay 1 ping 192.168.250.33 reset
<1-65535> reset time
Switch(config)# relay 1 ping 192.168.250.33 reset 60
<0-65535> hold time to retry
Switch(config)# relay 1 ping 192.168.250.33 reset 60 60
Switch(config)# relay 1 port
PORTLIST port list
Switch(config)# relay 1 port fa1-5
Switch(config)# relay 1 power
<1-2> power id
Switch(config)# relay 1 power 1
Switch(config)# relay 1 power 2
Switch(config)# relay 1 ring
Switch(config)# no relay
<1-2> relay id
Switch(config)# no relay 1 (Relay_ID: 1 or 2)
<cr>
Switch# show relay 1
Relay Output Type : Port Link
Port : 1, 2, 3, 4
Switch# show relay 2
Relay Output Type : Super Ring
Command Line
RocketLinx ES7506 User Guide: 2000529 Rev. E - 93
CLI Commands for Warnings