Table of Contents
Advertisement
MAC Address Table
Static Unicast MAC
Address
MAC Address Table
Packet Types
Remove
Reload
Apply
MAC Address Table
Some applications may require that you type in the static Unicast MAC address to its MAC
address table. Type the MAC Address (format: xxxx.xxxx.xxxx), select its VID, and Port ID,
and then click Add to add it to MAC Address table.
This displays all the MAC Addresses learnt by the switch fabric. The packet types include
Management Unicast, Static Unicast, Dynamic Unicast, Static Multicast, and Dynamic
Multicast. The table allows you to sort the address by the packet types and port.
•
Management Unicast means the MAC address of the switch. It belongs only to the CPU
port.
•
Static Unicast MAC addresses can be added and deleted.
•
Dynamic Unicast MAC is a MAC address learnt by the switch Fabric.
•
Static Multicast can be added by the CLI and can be deleted using the web interface and
CLI.
•
Dynamic Multicast appears after you enabled IGMP and the switch learnt IGMP report.
Click to remove the static Unicast/Multicast MAC address.
Click to reload to refresh the table. The new learnt Unicast/Multicast MAC address are updated
in the MAC address table.
Click Apply to apply the settings.
Note: You must Save the settings (Page 104), if you want to maintain these settings if the
RocketLinx ES7506 is powered off.
Description
RocketLinx ES7506 User Guide: 2000529 Rev. E - 97
MAC Address Table
Advertisement
Table of Contents
