Basic Settings
The Basic Setting group allows you the ability to configure switch information, IP address, User name/
Password of the system. It also allows you to do firmware upgrade, backup and restore configuration, reload
factory default, and reboot the system.
The following web pages are included in this group:
•
Switch Setting
on Page 43
•
Admin Password
on Page 44
•
IP Configuration
on Page 45
•
Time Setting
on Page 46
•
DHCP Server Configuration
•
DHCP Leased Entries
•
DHCP Relay Agent
•
Backup and Restore
•
Firmware Upgrade
•
Load Default
on Page 57
•
System Reboot
on Page 57
Optionally, you can use the CLI for configuration, see
Switch Setting
You can assign the System Name, Location, Contact and view ES7506 information.
Switch Setting Page
System Name
System Location
System Contact
System OID
System Description
Firmware Version
RocketLinx ES7506 User Guide: 2000529 Rev. F
on Page 49
on Page 50
on Page 51
on Page 52
on Page 55
You can assign a name to the ES7506. You can input up to 64 characters. After you
configure the name, The CLI system selects the first 12 characters as the name in
CLI system.
You can specify the ES7506 physical location with up to 64 characters.
You can specify contact people with up to 64 characters by typing the Administer's
name, mail address or other information.
The SNMP Object ID of the ES7506. You can follow the path to find its private MIB
in an MIB browser.
Note: When you attempt to view private MIB, you should first compile private MIB
files into your MIB browser.
Industrial Managed Switch ES7506.
Displays the firmware version installed in this ES7506.
Configuration Using the Web Interface
Basic Settings (CLI)
on Page 108.
Basic Settings - 43