Comtrol ES7506 User Manual page 68

Command Lines for RSTP
Feature
Redundant Ring
Switch(config)# redundant-ring 1
Ring 1 created
Create or configure
Switch(config-redundant-ring)#
a Ring
Note: 1 is the target Ring ID which is going to be created or configured.
Switch(config-redundant-ring)# version
default
Super Ring rapid-super-ring
Version
super-ring
Switch(config-redundant-ring)# version rapid-super-ring
Switch(config-redundant-ring)# priority
<0-255>
Priority
default
Switch(config-redundant-ring)# super-ring priority 100
Switch(config-redundant-ring)# port
IFLIST
Ring Port
cost
Switch(config-redundant-ring)# port fa1,fa2
Switch(config-redundant-ring)# port cost
<0-255>
default
Switch(config-redundant-ring)# port cost 100
Ring Port Cost
<0-255>
default
Switch(config-redundant-ring)# port cost 100 200
Set path cost success.
Switch(config-redundant-ring)# rapid-dual-homing enable
Switch(config-redundant-ring)# rapid-dual-homing disable
Switch(config-redundant-ring)# rapid-dual-homing port
Rapid Dual
IFLIST
Homing
auto-detect
IFNAME
Switch(config-redundant-ring)# rapid-dual-homing port fa3,fa5-6
set Rapid Dual Homing port success.
Note: Auto-detect is recommended for Dual Homing.
68 - RocketLinx ES7506 User Guide: 2000529 Rev. E
set default to Redundant ring
rapid super ring
super ring
valid range is 0 to 255
set default
Interface list, ex: fa1,fa3-5
path cost
valid range is 0 or 255
set default (128)valid range is 0 or 255
valid range is 0 or 255
set default (128)valid range is 0 or 255
Interface name, ex: fastethernet1
Uplink auto detection
Interface name, ex: fastethernet1
Command Line
Command Lines for RSTP