Table of Contents
Advertisement
Factory Defaults
This represents a firmware upgrade in TFTP server mode.
After finishing transmitting the firmware, the system copies the firmware file and replace the firmware in the flash. The CLI
show ...... until the process is finished.
Note: After the firmware has successfully uploaded, you should close and re-open the browser to clear the Java Virtual
Machine cache.
Factory Defaults
You can reset all the configurations of the switch to default settings.
Click Reset, if you want the ES7506 to reset
all configurations to factory default settings.
The system displays a popup message
window after finishing this command. The
default settings work after rebooting the
RocketLinx ES7506.
Click Yes in the popup alert screen to reset
the configuration to the factory defaults.
The following popup message screen shows you that the RocketLinx ES7506 has been reset to factory defaults. Click OK to
close the screen and then go to the Reboot page to reboot the switch.
Click OK. The system automatically reboots the ES7506.
Note: If you have already configured the IP of your ES7506 to another IP address, when you use this command with the CLI
and web interface, the software does not reset the IP address to the default IP address. The RocketLinx ES7506 IP
address does not change so that you can still connect the switch through the network.
40 - RocketLinx ES7506 User Guide: 2000529 Rev. E
Factory Defaults
Advertisement
Table of Contents
