Cli Commands Of The Traffic Prioritization - Comtrol ES7506 User Manual

CLI Commands of the Traffic Prioritization

This table provides detailed information about command lines for traffic prioritization configuration
Feature
QoS Setting
Queue Scheduling – Strict
Priority
Queue Scheduling - WRR
Port Setting – CoS (Default
Port Priority)
Port Setting – Trust Mode-
CoS Only
Port Setting – Trust Mode-
CoS First
Port Setting – Trust Mode-
DSCP Only
Port Setting – Trust Mode-
DSCP First
Port Setting - Trust Mode -
Port Based
QoS Priority Mode
Display - Queue
Scheduling
CLI Commands of the Traffic Prioritization
Switch(config)# qos queue-sched
sp Strict Priority
wrr Weighted Round Robin
Switch(config)# qos queue-sched sp
The queue scheduling scheme is setting to Strict Priority.
Switch(config)# qos queue-sched wrr
Switch(config)# interface fa1
Switch(config-if)# qos priority
<0-3> Assign a priority queue
Switch(config-if)# qos priority 3
The priority queue is set 3 ok.
Note: When change the port setting, you should Select the specific port first. Ex: fa1 means
fast Ethernet port 1.
Switch(config)# interface fa1
Switch(config-if)# qos trust cos
The port trust is set CoS only ok.
Switch(config)# interface fa1
Switch(config-if)# qos trust cos-first
The port trust is set CoS first ok.
Switch(config)# interface fa1
Switch(config-if)# qos trust dscp
The port trust is set DSCP only ok.
Switch(config)# interface fa1
Switch(config-if)# qos trust dscp-first
The port trust is set DSCP first ok.
Switch(config)# interface fa1
Switch(config-if)# qos trust port-based
The port trust is set port based ok.
Switch(config)# qos priority
cos CoS
dscp DSCP/TOS
port-based Port-based
Switch(config)# qos priority dscp
Switch# show qos priority
QoS Priority Mode: DSCP
Switch# show qos queue-sched
QoS queue scheduling scheme : Weighted Round Robin (Use an
8,4,2,1 weight)
CLI Commands of the Traffic Prioritization
Command Line
RocketLinx ES7506 User Guide: 2000529 Rev. E - 75