Table of Contents
Advertisement
Basic Settings
The Basic Setting group allows you the ability to configure switch information, IP address, User name/
Password of the system. It also allows you to do firmware upgrade, backup and restore configuration, reload
factory default, and reboot the system.
The following web pages are included in this group:
•
Switch Setting
on Page 45
•
Admin Password
on Page 46
•
IP Configuration
on Page 48
•
Time Setting
on Page 50
•
DHCP Server Configuration
-
DHCP Leased Entries
-
DHCP Option82 Relay Information
•
Backup and Restore
•
Firmware Upgrade
•
Load Default
on Page 64
•
System Reboot
on Page 65
Optionally, you can use the CLI for configuration, see
Switch Setting
You can assign the System Name, Location, Contact and view ES8509-XT information.
Switch Setting Page
System Name
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
on Page 54
on Page 56
on Page 57
on Page 59
on Page 63
You can assign a name to the ES8509-XT with up to 64 characters. After you
configure the name, the CLI system selects the first 12 characters as the name in
CLI system.
Configuration Using the Web Interface
Basic Settings (CLI)
on Page 143.
Basic Settings - 45
Advertisement
Table of Contents
