Configuration Using The Command Line Interface (Cli); Using The Serial Console - Comtrol ES7506 User Manual

Industrial rack mount managed poe switch; 4 - poe ports 2 - 10/100base-tx ports
Hide thumbs Also See for ES7506:
Table of Contents

Advertisement

Configuration Using the Command Line
Interface (CLI)
The RocketLinx ES7506 provides both in-band and out-band configuration methods:
Out-band management means that you configure the RocketLinx ES7506 using the RS-232 console cable and the
Command Line Interface (CLI) to access the RocketLinx ES7506 without attaching an admin PC to the network. You can
also use out-band management, if you lose the network connection to the RocketLinx ES7506.
In-band management means that you connect remotely using the RocketLinx ES7506 IP address through the network. You
can remotely connect with the RocketLinx ES7506 embedded Java applet web interface or a Telnet console and the CLI.
If you are planning on using in-band management, you need to program the RocketLinx ES7506 IP address to meet your
network requirements. The easiest way to configure the IP address is using a Windows system and NetVision, which is
discussed in
Initial Configuration Using NetVision
If you want to use the web interface, see
Use the following procedures to access the RocketLinx ES7506 using the CLI:

Using the Serial Console

Using a Telnet Console
Using the Serial Console
Comtrol provides one RS-232 RJ45 console cable with the RocketLinx ES7506.
1.
Attach the RS-232 DB9 connector to your PC COM port and connect the other end to the Console port of the RocketLinx
ES7506. If you misplace the cable, you can use this console cable pin assignment or purchase a null-modem cable.
2.
Start a terminal program such as HyperTerminal or the Comtrol Test Terminal program. You can download Test Terminal
from the
FTP site
or locate it on the CD shipped with the RocketLinx ES7506.
HyperTerminal
-
Go to Start -> Program -> Accessories -> Communications -> HyperTerminal
-
Enter a name for the new console connection and click OK.
-
Select the appropriate COM port number.

Configuration Using the Command Line Interface (CLI)

on Page 11.
Configuration Using the Web Interface
RJ45 Pin DB9F Pin
1
7
2
9
3
4
4
5
Pin 1
5
1
6
3
Pin 6
7
2
8
8
on Page 17.
Pin 5
Pin 9
RocketLinx ES7506 User Guide: 2000529 Rev. E - 21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rocketlinx es7506

Table of Contents