Table of Contents
Advertisement
Rate Control
Rate control is a form of flow control used to enforce a strict bandwidth limit of a port. You can program separate trasmitting
(Egress Rule) and receiving (Ingress Rule) rate limits for each port, and even apply the limit to certain packet types as
described below.
Rate Control
Limit Packet
Type
Rate
Apply
Rate Control
Select the packet type that you want to filter. The packet types of the
Ingress Rule (incoming) listed here includes Broadcast Only,
Broadcast/multicast, Broadcast/Multicast/UnknownUnicast, and All.
The packet types of the Egress Rule (outgoing) only support All packet
types.
This column allows you to manually assign the limit rate of the port.
Valid values support 128Kbps, 256Kbps, 512Kbps, 1024Kbps,
2048Kbps, 4096Kbps and 8192Kbps.
Click Apply to apply the settings.
Note: You must Save the settings (Page 104), if you want to maintain
these settings if the RocketLinx ES7506 is powered off.
Description
RocketLinx ES7506 User Guide: 2000529 Rev. E - 49
Rate Control
Advertisement
Table of Contents
