Basic Setting
The Basic Setting group provides you to configure switch information, IP address, User name/Password of the system. It also
allows you to do firmware upgrade, backup and restore configuration, reload factory default, and reboot the system. The
following commands are included in this group:
•
on Page 29
Switch Setting
•
on Page 30
Admin Password
•
on Page 30
IP Configuration
•
on Page 31
Time Setting
•
on Page 34
Jumbo Frame
•
DHCP Server Configuration
•
on Page 38
Backup and Restore
•
on Page 39
Firmware Upgrade
•
on Page 40
Factory Defaults
•
on Page 41
System Reboot
•
CLI Commands for Basic Setting
Switch Setting
You can assign System name, Location, Contact and view system information.
Switch Setting
System Name
System Location
System Contact
System OID
System Description
Firmware Version
Device MAC
Basic Setting
on Page 35
on Page 42
You can assign a name to the device. You can input up to 64 characters. After you configure the
name, The CLI system selects the first 12 characters as the name in CLI system.
You can specify the switch's physical location with up to 64 characters.
You can specify contact people with up to 64 characters by typing the name, mail address or other
information of the administrator.
The SNMP object ID of the switch. You can follow the path to find its private MIB in MIB
browser.
Note: When you attempt to view private MIB, you should first compile private MIB files into
your MIB browser.
Managed Gigabit PoE + Ethernet Switch is the system description of this product.
Displays the firmware version installed in this device.
Displays a unique hardware address (MAC address) assigned in the factory.
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 29
Description
Basic Setting