Table of Contents
Advertisement
Backup and Restore
Backup and Restore
Use the Backup command to save the current configuration file saved in the
switch's flash to admin PC or TFTP server. This allows you to go to the
Restore command later to restore the configuration file back to the
RocketLinx ES7506. Before you restore the configuration file, you must
place the backup configuration file in the PC or TFTP server. The switch
then downloads this file back to the flash.
The RocketLinx ES7506configuration file is a pure text file. You can open
the file with Word or Notepad. You can also modify the file, add/remove the
configuration settings, and then restore back to the RocketLinx ES7506.
There are two modes to backup/restore the configuration file: Local File
mode and TFTP Server mode. Click the Folder icon to select the target file
you want to backup/restore.
Note: Folders of the path to the target file do not allow you to input space
key.
Backup and Restore
Backup Configuration
Backup
Restore Configuration
Restore
38 - RocketLinx ES7506 User Guide: 2000529 Rev. E
•
Local File: In this mode, the switch acts as the file server. Browse to the target folder and
then type the file name to backup the configuration. You can also browse to the target
folder and select an existing configuration file to restore the configuration back to the
switch. This mode is only provided by the web UI as the backup and restore functions are
not supported by the CLI.
•
TFTP Server: In this mode, the switch acts as TFTP client. Confirm that your TFTP
server is ready, then enter the IP address of TFTP Server and Backup configuration file
name. This mode can be used in both the CLI and web interface.
-
TFTP Server IP Address: Enter the IP address of your TFTP Server.
-
Backup File Name: Enter the name of the backup file.
Note: Pointing to the wrong file causes the entire configuration to be skipped.
The Backup command can only backup the configuration file to your PC or TFTP server.
You can select local file or TFTP server to restore startup configuration.
•
Local File: The file name of startup configuration file to be uploaded.
Restore File Name: You can enter the configuration file name, or use file chooser to select
the configuration file to be uploaded to the switch.
•
TFTP Server: Restore startup configurations via uploadable TFTP Server file.
-
TFTP Server IP: The IP address of the TFTP server where your startup configuration
can be uploaded.
-
Restore File Name: The file name of startup configuration file to be uploaded.
Click to restore switch startup configurations to switch.
Description
Backup and Restore
Advertisement
Table of Contents
