Cli Commands For The Vlan - Comtrol ES7506 User Manual

Port-Based VLAN
Each port of the RocketLinx ES7506 supports Tag modify function. It includes Untagged,
Egress Tagged/
Tagged or Un-modify modes. The packets egress from this port is modified according to the
Untagged
selected rule.
Click Apply to apply the settings.
Apply
Note: You must Save the settings (Page 104), if you want to maintain these settings if the

CLI Commands for the VLAN

The following table provides detailed information about command lines for VLAN port configuration, VLAN configuration,
and VLAN table display.
Feature
VLAN Port Configuration
show vlan
ex:
Switch# sh vlan
Displays the current
Port-based vlan mode:
port based vlan
Port PVID EgressMode
configuration for each
---- ---- ---------- ----------------------------
port, which include the
default PVID, the ports
for forwarding, and the
egress mode of the
port.
Switch#
switchport port-based-vlan egress-ports [IFLIST]
The ports where the
frame comes in to this ex: port 1 can forward packet to port 2,3
port are allowed to
Switch(config-if)# switchport port-based-vlan egress-ports fa2,fa3
forward to.
Set port-based vlan success
switchport trunk native vlan VID
ex: assign VID 1 to port 1
Switch# configure terminal
Assign default PVID
Switch(config)# interface fa1
for this port
Switch(config-if)# switchport trunk native vlan 1
Set port default vlan id to 1 success
Switch(config-if)#
Specify when a frame
switchport port-based-vlan mode (untagged|tagged|unmodified)
that is egressing from
ex: Egress packet of port 1 with tagged.
this port should be
Switch(config-if)# switchport port-based-vlan mode tagged
tagged, untagged or
Set port-based vlan mode success
unmodified
CLI Commands for the VLAN
RocketLinx ES7506 is powered off.
fa1 1 Tagged fa2-3
fa2 1 Untagged fa3-4
fa3 1 Untagged fa1-2,fa4-6
fa4 1 Untagged fa1-3,fa5-6
fa5 3 Untagged fa1-4,fa6
fa6 1 Untagged fa1-5
Description
Command Line
Egress Ports
RocketLinx ES7506 User Guide: 2000529 Rev. E - 71
CLI Commands for the VLAN