Snmp Traps - Comtrol ES7506 User Manual

Industrial rack mount managed poe switch; 4 - poe ports 2 - 10/100base-tx ports

Hide thumbs Also See for ES7506:

Table of Contents

SNMP Traps

SNMP Trap is the notification feature defined by SNMP protocol. All the

SNMP management applications can understand such trap information. So

you do not need to install new applications to read the notification

information.

Use this page to Enable SNMP Trap, configure the SNMP Trap server

IP, Community name, and trap Version V1 or V2. After configuration,

press Apply to enable the settings You can see the change of the SNMP

pre-defined standard traps and Comtrol pre-defined traps. The pre-defined

traps can be found in the

Comtrol private

Note: You must Save the settings (Page 104), if you want to maintain

these settings if the RocketLinx ES7506 is powered off.

84 - RocketLinx ES7506 User Guide: 2000529 Rev. E

MIB.

SNMP Traps

Table of Contents

Rocketlinx es7506