Comtrol ES7506 User Manual page 57

Syntax poe powering-mode IEEE 802.3af/forced
802.3af: deliver power if and only if the attached PD comply with
Parameters
IEEE 802.3af
forced: deliver power no maater what PD attached
Configuration mode
Command Mode
Description Set the Powering mode of PoE
Set forced powering mode
EX 1:
Switch(config)# poe powering-mode forced
Switch(config)#
Examples
Set PoE port 2 to schedule mode.
EX 2:
Switch(config)# poe powering-mode 802.3af
Switch(config)#
Syntax poe control-mode user/schedule
user: user mode
Parameters
schedule: schedule mode
Interface mode
Command Mode
Set the control mode of port
Description
Set PoE port 2 to user mode.
EX 1:
Switch(config)# interface fa2
Examples
Switch(config-if)# poe control-mode user
Set PoE port 2 to schedule mode.
EX 2:
Switch(config-if)# poe control-mode schedule
Syntax poe user enable/disable
enable: enable port in user mode
Parameters
disable: disable port in user mode
Interface mode
Command Mode
Enable/Disable the PoE of the port in user mode.
Description If in schedule mode, it will come into affect when the control
mode changes to user mode.
To enable the PoE function in user mode
Switch(config-if)# poe user enable
Examples
To disable the PoE function in user mode
Switch(config-if)# poe user disable
Command Line for PoE Control
Command Line for PoE Control
RocketLinx ES7506 User Guide: 2000529 Rev. E - 57