Table of Contents
Advertisement
Hardware Installation
2.
Connect a ground wire between the chassis and earth
ground using 12-24AWG wire to ensure that the
RocketLinx ES7506 is not damaged by noise or
electrical shock.
a.
Loosen the earth ground screw on the right side of
the RocketLinx ES7506.
b.
Tighten the screw after the earth ground wire is
connected.
Mount the RocketLinx ES7506
You can use the following procedure to mount the RocketLinx ES7506 on a DIN rail or on the wall.
Use the hook holes located at the corners of the wall-mount plate to mount the ES7506.
Note: The RocketLinx ES7506 will disperse heat through the metal case during PoE port operation. The RocketLinx ES7506
should be installed and mounted onto a panel which provides good heat dispersion.
8 - RocketLinx ES7506 User Guide: 2000529 Rev. E
Electrical Specifications (Continued)
Power Consumption
Maximum
Attaching the ES7506 to the Wall
Values
8W without PD load
Mount the RocketLinx ES7506
Advertisement
Table of Contents
