Save To Flash; Command Lines For Saving To Flash; Logout; Command Lines For Logging Out - Comtrol ES7506 User Manual

Save to Flash

Save to Flash
Save Configuration allows you to save any configuration you just made to the flash. Powering off the switch without clicking
Save Configuration causes loss of the new settings. After selecting Save Configuration, click Save to Flash to save your
new configuration.

Command Lines for Saving to Flash

Feature
Save

Logout

The RocketLinx ES7506 provides two logout methods. The CLI connection logs out of configure terminal mode, if you do not
input any command after 30 seconds. The Logout command in the web interface allows you to manually logout the web
connection. Click Yes to logout, No to go back the configuration page.

Command Lines for Logging Out

Feature
Logout
104 - RocketLinx ES7506 User Guide: 2000529 Rev. E
SWITCH# write
Building Configuration...
[OK]
Switch# copy running-config startup-config
Building Configuration...
[OK]
SWITCH> exit
SWITCH# exit
Command Line
Command Line
Save to Flash