Comtrol ES7506 User Manual page 45

Backup and Restore
Backup Startup Configuration
file
Restore Configuration
Show Startup Configuration
Show Running Configuration
Firmware Upgrade
Firmware Upgrade
Factory Default
Factory Default
System Reboot
Reboot
CLI Commands for Basic Setting
Switch# copy startup-config tftp: 192.168.250.33/
default.conf
Writing Configuration [OK]
Note: To backup the latest startup configuration file, you should save current settings to
flash first. You can refer to
to the flash.
In the example above, 192.168.250.33 is the TFTP server's IP and default.conf is
name of the configuration file. Your environment may use different IP addresses
or different file name. Type target TFTP server IP or file name in this command.
Switch# copy tftp: 192.168.250.33/default.conf startup-
config
Switch# show startup-config
Switch# show running-config
Switch# archive download-sw /overwrite tftp 192.168.11.33
ES7506.bin
Firmware upgrading, don't turn off the switch!
Tftping file ES7506.bin
Firmware upgrading
...........................................................
.....................
...........................................................
.....................
...........................
Firmware upgrade success!!
Rebooting.......
Switch# reload default-config file
Reload OK!
Switch# reboot
Switch# reboot
Save to Flash on Page 104 to see how to save settings
RocketLinx ES7506 User Guide: 2000529 Rev. E - 45
CLI Commands for Basic Setting