Network Port(S) - Lantronix SecureLinx SLC48 User Manual

Network Port(s)

To enter settings for one or both network ports:
1. From the main menu, select Network Settings. The following page displays:
2. Enter the following information for one or both network ports (Eth1 and Eth2).
Eth1 and Eth2 Settings
Note:
PPP) are not currently supported.
Disabled
SecureLinx SLC User Guide
Configurations with the same IP subnet on multiple interfaces (Ethernet or
If selected, disables the network port. Defaults are Eth1
and Eth2 enabled.
6: Basic Parameters
41