Firewall Commands; Logging Commands - Lantronix SecureLinx SLC48 User Manual

Description
Displays event definitions.

Firewall Commands

set firewall
Syntax
set firewall <one or more parameters>
Description
Configures packet filtering for incoming network traffic.
Parameters
allowport <http|https|smbcifs|ssh|telnet>
denyport <http|https|smbcifs|ssh|telnet>
invisibletoping <enable|disable>
rejectmethod <reply|ignore>
state <enable|disable>
show firewall
Syntax
show firewall
Description
Displays firewall settings.

Logging Commands

set deviceport port
Syntax
set deviceport port <Device Port List or Name> <one or more deviceport
parameters>
Description
Configures logging settings for one or more device ports.
Local logging must be enabled for a device port for the locallog commands to be executed. To
use the set locallog clear command, the user must have permission to clear port buffers
(see 10: User Authentication).
Example
set deviceport port 2-5,6,12,15-16 baud 2400 locallogging enable
Parameters
emaildelay <Email Delay>
emaillogging <disable|bytecnt|charstr>
emailrestart <Restart Delay>
emailsend <email|trap|both>
SecureLinx SLC User Guide
14: Command Reference
195