Equivalent Slc Network Command - Lantronix SecureLinx SLC48 User Manual

e) To open an SSH session to a specific device port, click the Yes link in the SSH
To configure how SLCs are searched for on the network:
1. On the SLC Network page, click the Search Options button. The following web
page displays:
2. Enter the following:
SLC Network
Search
IP Address
3. If you entered an IP address, click the Add IP Address button. The IP address
displays in the IP Address List.
4. Repeat steps 2 and 3 for each IP address you want to add.
5. To delete an IP address from the IP Address List, select the address and click the
Delete IP Address button.
6. Click Apply. When the "SLC Network configuration is complete" message displays,
click SLC Network on the main menu. The SLC Network page displays the SLCs
resulting from the search. You can now manage these SLCs.

Equivalent SLC Network Command

The following command for the command line interface corresponds to the web page
entry described above:
SecureLinx SLC User Guide
Enabled column.
Select the type of search you want to conduct.
Local Subnet performs a broadcast to detect SLCs on the
local subnet.
Manually Entered IP Address List provides a list of IP
addresses that may not respond to a broadcast because of
how the network is configured.
The default is Both.
If you selected Manually Entered IP Address List or
Both, enter the IP address of the SLC you want to find and
manage.
12: Maintenance and Operation
160