Events - Lantronix SecureLinx SLC48 User Manual

Events

On this page, you can define what action you want to take for events that may occur in
the SLC.
1. From the main menu, select SLC Maintenance – Events. The following page
displays:
2. Enter the following:
Event Trigger
Action
Ethernet
Modem
Connection on
NMS/Host to
forward trap to
SecureLinx SLC User Guide
From the drop-down list, select the type of incident that
triggers an event. Currently, the only option is Receive
Trap.
From the drop-down list, select the action taken because
of the trigger. For example, the action can be writing an
entry into the syslog with details of the event or sending
the trap(s) to the Ethernet or modem connection.
For actions that require an Ethernet connection (for
example, Forward All Traps to Ethernet), select the
Ethernet port to use.
For actions that require a modem connection (for example,
Forward All Traps to a Modem Connection, select which
device port or PC Card slot with a modem connection to
use.
For actions that forward a trap, enter the IP address of the
computer to forward the trap to. The computer does not
have to be an SNMP NMS; it just has to be capable of
receiving SNMP traps.
12: Maintenance and Operation
156