Lantronix SecureLinx SLC48 User Manual page 152

To verify that the host is up and running:
diag ping <IP Address or Name> [<parameters>]
Parameters:
To display performance statistics for an Ethernet port or a device port (averaged
over the last 5 seconds):
diag perfstat [ethport <1|2>] [deviceport <Device Port # or Name>]
To generate and send Ethernet packets:
diag sendpacket host <IP Address or Name> port <TCP or UDP Port
Number> [string <Packet String>] [protocol <tcp|udp>] [count
<Number of Packets>]
The default is 1.
To display all network traffic, applying optional filters:
diag nettrace <one or more parameters>
Parameters:
SecureLinx SLC User Guide
count <Number of Times to Ping>
The default is 5.
packetsize <Size in Bytes>
The default is 64.
Note: This command is not available
ethport <1|2>
host <IP Address or Name>
numpackets <Number of Packets>
protocol <tcp|udp|icmp>
verbose <enable|disable>
12: Maintenance and Operation
152