Lantronix SecureLinx SLC48 User Manual page 199

14: Command Reference
Parameters
locdir <Directory>
mount <enable|disable>
remdir <Remote NFS Directory>
rw <enable|disable>
Enables or disables read/write access to remote directory.
set nfs unmount
Syntax
set nfs unmount <1|2|3>
Description
Unmounts a remote NFS share.
set cifs
Syntax
set cifs <one or more parameters>
Description
Configures the SMB/CIFS share, which contains the system and device port logs.
Note: The admin config command saves SLC configurations on the SMB/CIFS share.
Parameters
eth1 <enable|disable>
eth2 <enable|disable>
state <enable|disable>
workgroup <Windows workgroup>
set cifs password
Syntax
set cifs password
Description
Changes the password for the SMB/CIFS share login (default is cifsuser).
show cifs
Syntax
show cifs
Description
Displays SMB/CIFS settings.
show nfs
Syntax
show nfs
SecureLinx SLC User Guide 199